Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

HINGE PILLAR (OUTER) INSTALLATION [PANEL REPLACEMENT]

< Previous Next >

2016 – MX-5 – Body and Accessories

HINGE PILLAR (OUTER) INSTALLATION [PANEL REPLACEMENT]

Symbol Marks

Installation Procedure

1. When installing new parts, measure and adjust the body as necessary to conform with standard dimensions.

2. Drill holes for the plug welding before installing the new parts.

3. After temporarily installing new parts, make sure the related parts fit properly.

4. Plug weld the 8 locations indicated by (A) shown in the figure, then install the front pillar (inner).

5. Plug weld the 11 locations indicated by (B) shown in the figure, then install the front pillar reinforcement.

6. Plug weld the 56 locations indicated by (C) shown in the figure, then install the hinge pillar (outer).

7. Plug weld the 34 locations indicated by (D) shown in the figure, then install the cowl side panel.

< Previous Next >

© 2014 Mazda North American Operations, U.S.A.