< Previous Next >

2016 – MX-5 – Body and Accessories

FRONT FRAME COMPONENT INSTALLATION [PANEL REPLACEMENT]

Symbol Marks

Installation Procedure

1. When installing new parts, measure and adjust the body as necessary to conform with standard dimensions.

2. Drill holes for the plug welding before installing the new parts.

3. After temporarily installing new parts, make sure the related parts fit properly.

4. Plug weld the 39 locations indicated by (A) from the engine room shown in the figure.

5. Plug weld the 43 locations indicated by (B) shown in the figure.

6. Plug weld the 4 locations indicated by (C) from the room shown in the figure, then install the front frame component.

< Previous Next >