< Previous Next >

2016 – MX-5 – Body and Accessories

SHROUD LOWER PANEL INSTALLATION [PANEL REPLACEMENT]

Symbol Marks

Installation Procedure

1. When installing new parts, measure and adjust the body as necessary to conform with standard dimensions.

2. Drill holes for the plug welding before installing the new parts.

3. After temporarily installing new parts, make sure the related parts fit properly.

4. Plug weld the 10 locations indicated shown in the figure, then install the shroud lower panel.

NOTE:

• When replacing the shroud upper reinforcement separately, weld the 12 locations indicated by (B).

< Previous Next >