PERSONALIZATION FEATURES
2016 – – Personalized Features
PERSONALIZATION FEATURES
CAUTION:
-
The personalization feature may not be set correctly if [Not equipped] is selected in the setting displayed on the M-MDS. Do not select [Not equipped] in the setting displayed on the M-MDS.
CAUTION:
-
Settings of some personalization features displayed on the M-MDS cannot be switched depending on the vehicle specification.
-
The following systems can be personalized.
-
When performing a personalization setting, refer to the referenced section for the detailed setting procedure.
Security And Locks
Advanced keyless entry system
NOTE:
-
There are two types of personalization procedures; one using the M-MDS and the other using the center display.
|
Personalization features |
Setting contents |
Setting procedure |
|
Advanced keyless entry system and push button start system functions can be disabled (disable). |
Enable/Disable |
M-MDS is used. (See SECURITY AND LOCKS PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
The out-of-area (reception area) type auto lock function can be set. |
OFF / ON |
M-MDS is used. (See SECURITY AND LOCKS PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
OFF / ON |
Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
|
The operation start time of the auto re-lock function can be changed. |
30 seconds./60 seconds./90 seconds. |
M-MDS is used. (See SECURITY AND LOCKS PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
30 seconds / 60 seconds / 90 seconds |
Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
|
The keyless beeper volume can be adjusted. |
Off / Low / Medium / High |
M-MDS is used. (See SECURITY AND LOCKS PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
Off / Low / Medium / High |
Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
|
The setting content for the advanced keyless entry system can be returned to the initial value. |
YES / NO |
Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.) |
Keyless entry system
NOTE:
-
There are two types of personalization procedures; one using the M-MDS and the other using the center display.
|
Personalization features |
Setting contents |
Setting procedure |
|
The keyless entry system and push button start system functions can be disabled (unusable). |
Enable/Disable |
M-MDS is used. (See SECURITY AND LOCKS PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
The operation start time of the auto re-lock function can be changed. |
30 seconds./60 seconds./90 seconds. |
M-MDS is used. (See SECURITY AND LOCKS PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
30 seconds / 60 seconds / 90 seconds |
Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
|
The setting content for the keyless entry system can be returned to the initial value. |
YES / NO |
Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.) |
Power door lock system
NOTE:
-
There are two types of personalization procedures; one using the M-MDS and the other using the center display.
|
Personalization features |
Setting contents |
Setting procedure |
|
Auto door lock function can be changed. |
Off/Lock: When Driving, Unlock: In Park./Lock When Driving./Lock: Driving, Unlock: IGN Off./Lock When Shifting Out Of P./Lock: Shift From P, Unlock: In P. |
M-MDS is used. (See SECURITY AND LOCKS PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
Off / Lock: When Driving, Unlock: In Park / Lock: When Driving / Lock: When Driving, Unlock: IGN Off / Lock: Shifting from Park / Lock: Shifting from Park, Unlock: In Park |
Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
|
Returns the setting content of the door lock system to the initial setting. |
YES / NO |
Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.) |
Lighting Systems
Auto light system
NOTE:
-
There are two types of personalization procedures; one using the M-MDS and the other using the center display.
|
Personalization features |
Setting contents |
Setting procedure |
|
Auto light sensitivity can be changed. |
Extra Low (Except Japan)/Low (All Others)/Standard (All Others)/High (Except Japan)/Extra High (Except Japan) |
M-MDS is used. (See CONTROL SYSTEM PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
Light / Medium Light / Medium / Medium Dark / Dark |
Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
|
Returns the setting content of the lighting system to the initial setting. |
YES / NO |
Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.) |
Turn light system
NOTE:
-
There are two types of personalization procedures; one using the M-MDS and the other using the center display.
|
Personalization features |
Setting contents |
Setting procedure |
|
The operation of the three-flash turn signal function can be disabled. |
Off/On |
M-MDS is used. (See CONTROL SYSTEM PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
On / Off |
Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
|
Returns the setting content of the lighting system to the initial setting. |
YES / NO |
Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.) |
Coming home light system
NOTE:
-
There are two types of personalization procedures; one using the M-MDS and the other using the center display.
|
Personalization features |
Setting contents |
Setting procedure |
|
The coming home light system operation time can be switched. |
0 seconds./30 seconds./60 seconds./90 seconds./120 seconds. |
M-MDS is used. (See CONTROL SYSTEM PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
Off / 30 seconds / 60 seconds / 90 seconds / 120 seconds |
Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
|
Returns the setting content of the lighting system to the initial setting. |
YES / NO |
Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.) |
Leaving home light system
NOTE:
-
There are three methods for personalizing the leaving home light system: Using the M-MDS, using the center display, and using the light switch.
|
Personalization features |
Setting contents |
Setting procedure |
|
The leaving home light system can be switched between operable and inoperable. |
Off/On |
M-MDS is used. (See CONTROL SYSTEM PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
On / Off |
Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
|
Operable/Inoperable |
Light switch is used for the setting. (See LIGHTING SYSTEM PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
|
Returns the setting content of the lighting system to the initial setting. |
YES / NO |
Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.) |
Interior light control system
NOTE:
-
There are two types of personalization procedures; one using the M-MDS and the other using the center display.
|
Personalization features |
Setting contents |
Setting procedure |
|
30 minutes./60 minutes./10 minutes. |
M-MDS is used. (See CONTROL SYSTEM PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
60 minutes / 30 minutes / 10 minutes |
Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
|
The map light illumination time after all doors are closed can be changed. |
15 seconds./7.5 seconds./30 seconds./60 seconds. |
M-MDS is used. (See CONTROL SYSTEM PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
60 seconds / 30 seconds / 15 seconds / 7.5 seconds |
Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
|
Returns the setting content of the lighting system to the initial setting. |
YES / NO |
Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.) |
Daytime running light (DRL) system (Except Canada Specs.)
|
Personalization features |
Setting contents |
Setting procedure |
|
The DRL system function can be set. |
On / Off |
Light switch is used for the setting. (See LIGHTING SYSTEM PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
Returns the setting content of the lighting system to the initial setting. |
YES / NO |
Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.) |
Wiper/Washer System
Auto wiper system
NOTE:
-
There are two types of personalization procedures; one using the M-MDS and the other using the center display.
|
Personalization features |
Setting contents |
Setting procedure |
|
The auto wiper function can be disabled. |
Off*1 (Intermittent) / On (Rain Sensing) |
M-MDS is used. (See CONTROL SYSTEM PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
On / Off*1 |
Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.) |
- *1
- If the function is set to “Off”, the wipers will operate intermittently with the wiper switch in AUTO position.
Entertainment
Language
|
Personalization features |
Setting contents |
Setting procedure |
|
The display language can be changed. |
US English / Spanish / Canadian French |
Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.) |
Fuel economy monitor
|
Personalization features |
Setting contents |
Setting procedure |
|
The ending screen of the fuel monitor can be switched between display/non-display. |
On / Off |
Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
The function which synchronizes the reset of the fuel reset and trip meters can be switched between on/off. |
On / Off |
Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.) |
Instrumentation/Driver Info.
Turn and hazard indicator alarm
NOTE:
-
There are two types of personalization procedures; one using the M-MDS and the other using the center display.
|
Personalization features |
Setting contents |
Setting procedure |
|
The volume of the turn and hazard indicator alarm can be changed. |
Low/High |
M-MDS is used. (See INSTRUMENT CLUSTER PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
High / Low |
Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.) |
Lights-on reminder warning alarm
NOTE:
-
There are two types of personalization procedures; one using the M-MDS and the other using the center display.
|
Personalization features |
Setting contents |
Setting procedure |
|
The volume of the lights-on reminder warning alarm can be changed. |
OFF/Low/High |
M-MDS is used. (See INSTRUMENT CLUSTER PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
High / Low / Off |
Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.) |
- *1
- The setting of the lights-on reminder can be changed with the time setting of auto light off system set to Off.
Temperature
NOTE:
-
There are two types of personalization procedures; one using the instrument cluster (without center display) and the other using the center display.
|
Personalization features |
Setting contents |
Setting procedure |
|
The temperature unit can be changed.*1 |
°F / °C*2 |
Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
°F / °C*2 |
Instrument cluster is used for the setting. (See INSTRUMENT CLUSTER PERSONALIZATION FEATURES SETTING PROCEDURE.) |
- *1
- When the ambient temperature display is switched, the set A/C cabin temperature display is also changed.
- *2
- The initial value differs depending on the market.
Distance
|
Personalization features |
Setting contents |
Setting procedure |
|
The distance unit can be changed. |
Miles / Km*1 |
Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.) |
- *1
- The initial value differs depending on the market.
i-Activsense
Lane Departure Warning System (LDWS)
NOTE:
-
There are two types of personalization procedures; one using the M-MDS and the other using the center display.
|
Personalization features |
Setting contents |
Setting procedure |
|
The volume of the LDWS warning alarm (Beep) can be changed. |
High / Low |
Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
The volume of the LDWS warning alarm (Rumble) can be changed. |
High / Mid / Low |
Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
The type of the LDWS warning alarm can be changed. |
Beep / Rumble |
M-MDS is used. (See i-ACTIVSENSE PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
Beep / Rumble |
Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
|
The distance between the warning-trigger lines for the Lane Departure Warning System (LDWS) and vehicle lanes can be changed. |
Adaptive / Early / Medium / Late |
M-MDS is used. (See i-ACTIVSENSE PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
At Line / Before Line |
Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
|
The warning operation sensitivity of the lane departure warning system (LDWS) can be changed. |
Often/Medium/Rare |
M-MDS is used. (See i-ACTIVSENSE PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
High / Low |
Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
|
Returns the setting content of the lane departure warning system to the initial setting. |
YES / NO |
Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.) |
High Beam Control (HBC) system
NOTE:
-
There are two types of personalization procedures; one using the M-MDS and the other using the center display.
|
Personalization features |
Setting contents |
Setting procedure |
|
The high beam control (HBC) system can be switched between operable and inoperable. |
OFF/ON |
M-MDS is used. (See i-ACTIVSENSE PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
On / Off |
Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
|
Returns the setting content of the lighting system to the initial setting. |
YES / NO |
Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.) |
Adaptive front lighting system (AFS)
NOTE:
-
There are two types of personalization procedures; one using the M-MDS and the other using the center display.
|
Personalization features |
Setting contents |
Setting procedure |
|
The adaptive front lighting system (AFS) can be switched between operable and inoperable. |
OFF/ON |
M-MDS is used. (See i-ACTIVSENSE PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
On / Off |
Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
|
Returns the setting content of the adaptive front lighting system (AFS) to the initial setting. |
YES / NO |
Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.) |
Blind Spot Monitoring (BSM) system
NOTE:
-
There are two types of personalization procedures; one using the M-MDS and the other using the center display.
|
Personalization features |
Setting contents |
Setting procedure |
|
The volume of the blind spot monitoring (BSM) warning buzzer can be changed. |
OFF/Low/High |
M-MDS is used. (See i-ACTIVSENSE PERSONALIZATION FEATURES SETTING PROCEDURE.) |
|
High / Low / Off |
Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.) |