2016 – MX-5 – Body and Accessories

BACK-UP LIGHT SWITCH INSPECTION

1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2. Lift up the vehicle.

3. Remove the bolts.

4. Remove the member bracket.

5. Disconnect the connector.

6. Verify that the continuity between the back-up light switch terminals is as indicated in the table.

• If not as indicated in the table, replace the back-up light switch. (See BACK-UP LIGHT SWITCH REMOVAL/INSTALLATION [M66M-D].)

< Previous Next >