2016 – MX-5 – Body and Accessories

WASHER FLUID-LEVEL SENSOR INSPECTION

1. Turn the steering wheel to full right lock.

2. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

3. Lift up the vehicle.

4. Remove the front mudguard No.2. (See FRONT MUDGUARD REMOVAL/INSTALLATION.)

5. Disconnect the connector.

6. Verify that the continuity between the washer fluid-level sensor terminals is as indicated in the table.

• If not as indicated in the table, replace the washer fluid-level sensor. (See WASHER FLUID-LEVEL SENSOR REMOVAL/INSTALLATION.)

< Previous Next >