CROSSMEMBER No.1 REMOVAL [PANEL REPLACEMENT]
< Previous Next >
2016 – MX-5 – Body and Accessories
CROSSMEMBER No.1 REMOVAL [PANEL REPLACEMENT]
Symbol Marks
Removal Procedure
1. Drill the 17 locations indicated shown in the figure.
2. Remove the crossmember No.1.
3. Drill the 8 locations indicated shown in the figure, then remove the crossmember No.1 side bracket.
4. Drill the 8 locations (LH), 2 locations (RH) indicated shown in the figure, then remove the crossmember No.1 side reinforcement.
© 2014 Mazda North American Operations, U.S.A.