CRASH ZONE SENSOR [STANDARD DEPLOYMENT CONTROL SYSTEM]
2016 – MX-5 – Restraints
CRASH ZONE SENSOR [STANDARD DEPLOYMENT CONTROL SYSTEM]
Purpose
-
The crash zone sensor detects an impact during a frontal or frontal offset collision to the vehicle.
Function
-
The crash zone sensor converts the detected impact to an electrical signal.
Construction
-
The crash zone sensor is built into the crash sensor.
-
The crash zone sensor is located on the front bumper reinforcement on the back side of the front bumper.
-
Two crash zone sensors are installed for independent impact detection on the left and right.
Operation
-
For the crash zone sensor operation, refer to the [AIR BAG SYSTEM [STANDARD DEPLOYMENT CONTROL SYSTEM]]. (See AIR BAG SYSTEM [STANDARD DEPLOYMENT CONTROL SYSTEM].)
Fail-safe
-
Not applicable