DTC

C0002:01

Traction control solenoid valve

C0002:49

C0004:01

C0004:49

DETECTION CONDITION

• Traction control solenoid valve malfunction is detected.

FAIL-SAFE FUNCTION

• Refer to “Fail-safe function table”. (See DTC TABLE [DSC HU/CM].)

POSSIBLE CAUSE

• Traction control solenoid valve malfunction

SYSTEM WIRING DIAGRAM

—

Step

Inspection

Action

1

• Using the M-MDS, perform the simulation inspection for traction control solenoid valve.

  (See SIMULATION INSPECTION [DSC HU/CM].)

• Does the solenoid valve operate?

Yes

Go to the next step.

No

Replace the DSC HU/CM, then go to the next step.

(See DSC HU/CM REMOVAL/INSTALLATION.)

2

• Using the M-MDS, clear the DTC from the DSC HU/CM.

  (See CLEARING DTC [DSC HU/CM].)

• Using the M-MDS, perform the DSC HU/CM DTC inspection.

  (See DTC INSPECTION [DSC HU/CM].)

• Is the same DTC present?

Yes

Repeat the inspection from Step1.

If the malfunction recurs, replace the DSC HU/CM, then go to the next step.

(See DSC HU/CM REMOVAL/INSTALLATION.)

No

Go to the next step.

3

• Are any DTCs present?

Yes

Go to the applicable DTC inspection.

(See DTC TABLE [DSC HU/CM].)

No

DTC troubleshooting completed.