TCM REMOVAL/INSTALLATION [SJ6A-EL]
2016 – MX-5 – Transmission/Transaxle
TCM REMOVAL/INSTALLATION [SJ6A-EL]
CAUTION:
-
Do not drop or apply a shock to the TCM. Replace the TCM if it has been dropped or received an impact.
-
Make sure that your hand does not touch the terminal as the connector terminal could be damaged.
-
Water or foreign objects entering the connector can cause a poor connection or corrosion. Be sure not to drop water or foreign objects on the connector when disconnecting it.
1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)
2. Disconnect the connectors.
3. Remove the TCM.
4. Install in the reverse order of removal.
5. Perform the “Initial Learning” (TCM replacement). (See INITIAL LEARNING PROCEDURE [SJ6A-EL].)