2016 – MX-5 – Transmission/Transaxle

CLUTCH PEDAL POSITION SWITCH REMOVAL/INSTALLATION

1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2. Disconnect the clutch pedal position switch connector.

3. Rotate the clutch pedal position switch 45° counterclockwise.

4. Remove the clutch pedal position switch.

5. Insert a new clutch pedal position switch into the clutch pedal hole until the switch stops.

6. Rotate the clutch pedal position switch 45° clockwise.

7. Verify that the clutch pedal position switch is locked securely.

8. Connect the clutch pedal position switch connector.

9. Connect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

< Previous Next >