EPS CONTROL MODULE INSPECTION
< Previous Next >
2016 – MX-5 – Steering
EPS CONTROL MODULE INSPECTION
1. Measure the voltage of the EPS control module using a tester.
Terminal Voltage Table (Reference)
|
Terminal |
Connected to |
Test condition |
Specification (Reference) |
Inspection item |
|
1A |
Battery |
Under any condition |
B+ |
|
|
2A |
IG1 relay |
Ignition off |
1.0 V or less |
|
|
Ignition ON (engine off) |
B+ |
|||
|
2B |
CAN related module |
Because this terminal is for communication, determination using terminal voltage inspection is not possible. Perform the inspection using the DTC inspection. |
||
|
2C |
CAN related module |
Because this terminal is for communication, determination using terminal voltage inspection is not possible. Perform the inspection using the DTC inspection. |
||
© 2014 Mazda North American Operations, U.S.A.