PID

Unit/Condition

Data contents

SAS control module terminal

AB_WL

(Air bag system warning light status)

Lamp_Off/Lamp_On/Plant_Mode/Unknown

• Air bag system warning light off: Lamp_Off

• Air bag system warning light on: Lamp_On

• Air bag system warning light status: Plant_Mode

• Air bag system warning light status: Unknown

3Q, 3S

OCS_DTC_CLR

(Occupant classification sensor DTC cleared status)

NOTE:

• Displays in the M-MDS but it does not operate.

P_OCS_ST

(Occupant classification sensor status)

NOTE:

• Displays in the M-MDS but it does not operate.

P_SEAT_M_S

(Occupancy sensor)

Off/On

• Not occupant seated in passenger-side seat: Off

• Occupant seated in passenger-side seat: On

2AA

PAD_SW

(Passenger air bag deactibation (PAD) switch status)

NOTE:

• Displays in the M-MDS but it does not operate.

PAD_SW_FLT

(Passenger air bag deactibation (PAD) switch malfunction status)

NOTE:

• Displays in the M-MDS but it does not operate.

RES_F_AB1_D

(Driver-side air bag module (inflatorNo.1) resistance nominal)

ohm

Continuous: 1.37–6.33 ohms

3C, 3G

RES_F_AB1_P

(Passenger-side air bag module (inflatorNo.1) resistance nominal)

ohm

Continuous: 0.88–6.33 ohms

3K, 3N

RES_F_AB2_D

(Driver-side air bag module (inflatorNo.2) resistance nominal)

NOTE:

• Displays in the M-MDS but it does not operate.

RES_F_AB2_P

(Passenger-side air bag module (inflator No.2) resistance nominal)

NOTE:

• Displays in the M-MDS but it does not operate.

RES_S_AB_D

(Driver-side side air bag module resistance nominal)

ohm

Continuous: 0.88–10.53 ohms

1C, 1G

RES_S_AB_P

(Passenger-side side air bag module resistance nominal)

ohm

Continuous: 0.88–10.53 ohms

1K, 1N

RES_SB_LP_D

(Driver-side lap pre-tensioner seat belt resistance nominal)

NOTE:

• Displays in the M-MDS but it does not operate.

RES_SB_LP_P

(Passenger-side lap pre-tensioner seat belt resistance nominal)

NOTE:

• Displays in the M-MDS but it does not operate.

RES_SB_P_D

(Driver-side pre-tensioner seat belt resistance nominal)

ohm

Continuous: 0.88–6.33 ohms

2C, 2G

RES_SB_P_P

(Passenger-side pre-tensioner seat belt resistance nominal)

ohm

Continuous: 0.88–6.33 ohms

2K, 2N

RES_R_PR_D

(Rear pre-tensioner seat belt status)

NOTE:

• Displays in the M-MDS but it does not operate.

RES_R_PR_P

(Rear pre-tensioner seat belt status)

NOTE:

• Displays in the M-MDS but it does not operate.

PCD_A

(Poorly connected detector bar terminal voltage nominal (SAS control module connector A))

V

• Normal connected: 0.27 V or less

• Poor connected: 3.17 V or more

1a, 1b

PCD_B

(Poorly connected detector bar terminal voltage nominal (SAS control module connector B))

V

• Normal connected: 0.27 V or less

• Poor connected: 3.17 V or more

2a, 2b

PCD_C

(Poorly connected detector bar terminal voltage nominal (SAS control module connector C))

V

• Normal connected: 0.27 V or less

• Poor connected: 3.17 V or more

3a, 3b

SEAT_B_D

(Driver-side buckle switch status)

Unbuckled/Buckled

• Driver-side seat belt fastened (Driver-side buckle switch off): Buckled

• Driver-side seat belt not fastened (Driver-side buckle switch on): Unbuckled

2U

SEAT_B_P

(Passenger-side buckle switch status)

Unbuckled/Buckled

• Passenger-side seat belt fastened (Passenger-side buckle switch off): Buckled

• Passenger-side seat belt not fastened (Passenger-side buckle switch on): Unbuckled

2W

VPWR_IGA

(SAS control module power voltage)

V

Ignition is switched ON: IG1 voltage

2AD