INSPECTION OF SST (DEPLOYMENT TOOL) [TWO-STEP DEPLOYMENT CONTROL SYSTEM]
2016 – MX-5 – Restraints
INSPECTION OF SST (DEPLOYMENT TOOL) [TWO-STEP DEPLOYMENT CONTROL SYSTEM]
1. Before using the SST (49 H066 002), inspect its operation.
Inspection Procedure
1. Follow the steps below to inspect the SST (49 H066 002).
-
If not as indicated in the table, replace the SST (49 H066 002) because it has a malfunction.
WARNING:
-
Do not use a malfunctioning SST (49 H066 002), otherwise it could cause the air bag module or pre-tensioner seat belt to accidentally operate (deploy).
CAUTION:
-
Because the permissible voltage for the SST (49 H066 002) is 12 V, do not connect a 24 V power source because it will damage the SST. Always connect only a 12 V power source.
|
Step |
Inspection procedure |
Light condition |
|
|
Green |
Red |
||
|
1 |
Connect the power supply red clip to the positive battery terminal, and the black clip to the negative battery terminal. |
On |
Off |
|
2 |
Connect connectors A and B. |
Off |
On |
|
3 |
Press the activation switch. |
On |
Off |