CLEARING DTC [AUDIO UNIT]
2016 – MX-5 – Body and Accessories
CLEARING DTC [AUDIO UNIT]
NOTE:
-
The audio system DTC can be verified using the on-board diagnostic test mode to activate the on-board diagnostic function by operating the audio unit.
-
Before clearing the memory, be sure to enter all of the DTCs displayed by the DTC inspection in the Audio Repair Order Form.
-
If an audio unit DTC is cleared, select [For Audio Unit] below.
-
If a Bluetooth® unit DTC is cleared, select [For Bluetooth® Unit] below. (With Bluetooth® unit)
-
If a CD player DTC is cleared, select [For CD Player] below.
For Audio Unit
1. DTCs are displayed. (See DTC INSPECTION [AUDIO UNIT].)
2. While pressing the POWER/VOLUME button, press the MENU button for 3 s or more.
NOTE:
-
After clearing the DTCs, “No Err” is displayed and a beep sounds.
3. Switch the ignition off to end the on-board diagnostic test mode.
For Bluetooth® Unit
NOTE:
-
To clear a Bluetooth® unit DTC, it is necessary for vehicles with the Bluetooth® unit and the audio unit to recognize that the Bluetooth® unit is connected.
1. DTCs are displayed. (See DTC INSPECTION [AUDIO UNIT].)
2. While pressing the AUTO-M button, press the Preset button 4 for 3 s or more.
NOTE:
-
After clearing, “No Err” is displayed.
3. Switch the ignition off to end the on-board diagnostic test mode.
For CD Player
NOTE:
-
To clear a CD player DTC, it is necessary for vehicles with the CD player and the audio unit to recognize that the CD player is connected.
1. DTCs are displayed. (See DTC INSPECTION [AUDIO UNIT].)
2. While pressing the AUTO-M button, press the Preset button 6 for 3 s or more.
NOTE:
-
After clearing the DTCs, “No Err” is displayed.
3. Switch the ignition off to end the diagnostic assist function.