CENTER PANEL No.2 REMOVAL/INSTALLATION
2016 – MX-5 – Body and Accessories
CENTER PANEL No.2 REMOVAL/INSTALLATION
1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)
2. Install the following parts:
a. Passenger-side scuff plate (See SCUFF PLATE REMOVAL/INSTALLATION.)
b. Passenger-side front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)
c. Passenger-side A-pillar trim (See A-PILLAR TRIM REMOVAL/INSTALLATION.)
d. Passenger-side lower panel (See PASSENGER-SIDE LOWER PANEL REMOVAL/INSTALLATION.)
3. Move the center panel No.2 in the direction of the arrow shown in the figure, and detach clips A and B from the dashboard.
4. Disconnect the connector.
5. Remove the center panel No.2.
6. Install in the reverse order of removal.