Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

BLIND SPOT MONITORING (BSM) OFF INDICATOR LIGHT DOES NOT TURN ON [BLIND SPOT MONITORING (BSM) SYSTEM]

< Previous Next >

2016 – MX-5 – i-ACTIVSENSE

BLIND SPOT MONITORING (BSM) OFF INDICATOR LIGHT DOES NOT TURN ON [BLIND SPOT MONITORING (BSM) SYSTEM]

NOTE:

Description

  • The blind spot monitoring (BSM) OFF indicator light does not turn on while under the illumination conditions.

Possible malfunction

  • The blind spot monitoring (BSM) control module (LH) cannot verify the blind spot monitoring (BSM) switch ON/OFF.

    • Blind spot monitoring (BSM) switch-related malfunction

    • Blind spot monitoring (BSM) control module (LH) malfunction

  • The instrument cluster cannot turn on the blind spot monitoring (BSM) OFF indicator light.

    • Instrument cluster malfunction (illumination circuit malfunction)

Diagnostic Procedure

Step

Inspection

Action

1
    DETERMINE IF CAUSE OF MALFUNCTION IS BLIND SPOT MONITORING (BSM) SWITCH OR BLIND SPOT MONITORING (BSM) INDICATOR LIGHT

  • Display the blind spot monitoring system (BSM) PID MAIN_SW item using the M-MDS.

    (See PID/DATA MONITOR INSPECTION [BLIND SPOT MONITORING (BSM) CONTROL MODULE].)

  • Switch the blind spot monitoring (BSM) switch ON/OFF.

  • Does the PID MAIN_SW monitoring value turn on and off according to the blind spot monitoring (BSM) switch ON/OFF operation?

Yes

Go to Step 3.

No

Go to the next step.

2

Yes

Go to the next step.

No

Replace the blind spot monitoring (BSM) switch.

(See BLIND SPOT MONITORING (BSM) SWITCH REMOVAL/INSTALLATION.)

3
    DETERMINE IF MALFUNCTION CAUSE IS INSTRUMENT CLUSTER OR BLIND SPOT MONITORING (BSM) CONTROL MODULE (LH)

  • Turn off all the indicator lights and warning lights in the instrument cluster using the simulation function WL+IL of the M-MDS instrument cluster.

    (See ACTIVE COMMAND MODES INSPECTION [INSTRUMENT CLUSTER].)

  • Did the blind spot monitoring (BSM) OFF indicator light turn off?

Yes

Replace the blind spot monitoring (BSM) control module (LH).

(See BLIND SPOT MONITORING (BSM) CONTROL MODULE REMOVAL/INSTALLATION.)

No

Replace the instrument cluster.

(See INSTRUMENT CLUSTER REMOVAL/INSTALLATION.)

< Previous Next >

© 2014 Mazda North American Operations, U.S.A.