2016 – MX-5 – Body and Accessories

AUXILIARY JACK/USB PORT/SD CARD SLOT HUB REMOVAL/INSTALLATION

1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2. Remove the following parts:

a. Selector lever knob (AT) (See AUTOMATIC TRANSMISSION SHIFT MECHANISM REMOVAL/INSTALLATION.)

b. Shift lever knob (MT)

c. Shift panel compartment (See SHIFT PANEL REMOVAL/INSTALLATION.)

d. Upper panel (See UPPER PANEL REMOVAL/INSTALLATION.)

e. Parking brake lever boot panel (See PARKING BRAKE LEVER BOOT PANEL REMOVAL/INSTALLATION.)

f. Rear console (See REAR CONSOLE REMOVAL/INSTALLATION.)

g. Front console panel (See FRONT CONSOLE PANEL REMOVAL/INSTALLATION.)

h. Front console compartment (See FRONT CONSOLE REMOVAL/INSTALLATION.)

i. Side wall (See SIDE WALL REMOVAL/INSTALLATION.)

3. While pressing the tabs of the auxiliary jack/USB port/SD card slot hub in the direction of arrows (1) shown in the figure, move the auxiliary jack/USB port/SD card slot hub in the direction of arrow (2) and detach the tabs of the auxiliary jack/USB port/SD card slot hub from the front console.

4. Detach all auxiliary jack/USB port/SD card slot hub tabs from the front console.

5. Remove the auxiliary jack/USB port/SD card slot hub.

6. Install in the reverse order of removal.

< Previous Next >