DTC INSPECTION [CONNECTIVITY MASTER UNIT]
2016 – MX-5 – Body and Accessories
DTC INSPECTION [CONNECTIVITY MASTER UNIT]
When using M-MDS
1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
a. Select “Self Test”.
b. Select “All CMDTCs”.
3. Verify the DTC according to the directions on the screen.
-
If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection. (See DTC TABLE [CONNECTIVITY MASTER UNIT].)
4. After completion of repairs, clear all DTCs stored in the connectivity master unit (CMU). (See CLEARING DTC [CONNECTIVITY MASTER UNIT].)
When using Diagnostic Assist Function
DTC inspection can also be performed by launching the diagnostic assist function of the connectivity master unit (CMU). (See DIAGNOSTIC ASSIST FUNCTION [CONNECTIVITY MASTER UNIT].)