Description

MAP IS NOT DISPLAYED

Navigation map is not displayed

Possible Causes

• SD card malfunction

• Auxiliary jack/USB port/SD card slot hub malfunction

• Connectivity master unit (CMU) malfunction

Step

Inspection

Action

1

VERIFY DTCs

• Is a DTC displayed?

Yes

Perform the applicable DTC troubleshooting.

No

Go to the next step.

2

VERIFY SD CARD IDENTIFICATION CONDITION

• Switch the ignition OFF (LOCK).

• Remove the SD card.

• Unlock the tab on the SD card. (Navigation cannot be launched with the tab locked)

• Lock the doors and leave the vehicle for 5 min or more. (to stop the system completely)

• Unlock the doors (door closed) and start the engine.

• Wait until FM or compass screen is displayed in the center display. (to wait for the CMU to launch)

• Insert the SD card.

• Is [SD CARD INSERTED] displayed in the center display?

Yes

Go to the next step.

No

• Only [SD CARD INSERTED] is displayed:

• Go to the next step.

• [INVALID SD CARD] is displayed subsequently:

• Replace the SD card, then go to Step 6.

3

VERIFY NAVIGATION OPERATION

• Start the engine.

• Operate the NAVI button.

• Is the map displayed in the center display?

Yes

System is normal.

No

Replace the auxiliary jack/USB port/SD card slot hub, then go to Step 6. (See AUXILIARY JACK/USB PORT REMOVAL/INSTALLATION.)

4

• Switch the ignition OFF (LOCK).

• Remove the SD card.

• Is the SD card tab unlocked?

Yes

Go to the next step.

No

Repeat the diagnosis from Step 2.

5

• Disconnect the negative battery cable and wait for 1 min or more. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

• Connect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

• Switch the ignition OFF (LOCK).

• Lock the doors and leave the vehicle for 5 min or more.

• Unlock the doors and start the engine.

• Wait until FM or compass screen is displayed in the center display.

• Insert the SD card.

• Is [SD CARD INSERTED] displayed in the center display?

Yes

• Only [SD CARD INSERTED] is displayed:

• Repeat the diagnosis from Step 3.

• [INVALID SD CARD] is displayed subsequently:

• Replace the SD card, then go to the next step.

No

Replace the auxiliary jack/USB port/SD card slot hub, then go to the next step. (See AUXILIARY JACK/USB PORT REMOVAL/INSTALLATION.)

6

• Operate the NAVI button.

• Is the map displayed in the center display?

Yes

System is normal.

No

Repeat the diagnosis from Step 1.

• If the malfunction recurs, replace the CMU. (See CONNECTIVITY MASTER UNIT (CMU) REMOVAL/INSTALLATION.)