< Previous Next >

2016 – MX-5 – Body and Accessories

FRONT BUMPER REINFORCEMENT REMOVAL/INSTALLATION

1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2. Remove the following parts:

a. Front bumper (See FRONT BUMPER REMOVAL.) (See FRONT BUMPER INSTALLATION.)

b. Front bumper slider (See FRONT BUMPER SLIDER REMOVAL/INSTALLATION.)

c. Front combination light (See FRONT COMBINATION LIGHT REMOVAL/INSTALLATION.)

d. Crash zone sensor (See CRASH ZONE SENSOR REMOVAL/INSTALLATION [TWO-STEP DEPLOYMENT CONTROL SYSTEM].) (See CRASH ZONE SENSOR REMOVAL/INSTALLATION [STANDARD DEPLOYMENT CONTROL SYSTEM].)

3. Remove the fastener.

Front bumper reinforcement type A

Front bumper reinforcement type B

4. Move the air guide in the direction of the arrow shown in the figure and remove it.

Front bumper reinforcement type A

Front bumper reinforcement type B

5. Remove the bolt and set the fresh-air duct aside in the direction of the arrow shown in the figure.

Front bumper reinforcement type A

Front bumper reinforcement type B

6. Remove the fasteners.

Front bumper reinforcement type A

Front bumper reinforcement type B

7. Remove the bolts.

Front bumper reinforcement type A

Front bumper reinforcement type B

8. Remove the front bumper reinforcement.

9. Install in the reverse order of removal.

< Previous Next >