Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

A-PILLAR GARNISH REMOVAL

< Previous Next >

2016 – MX-5 – Body and Accessories

A-PILLAR GARNISH REMOVAL

1. Open the convertible top.

2. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

3. Open the door.

4. Remove the following parts:

a. A-pillar trim (See A-PILLAR TRIM REMOVAL/INSTALLATION.)

b. Female wedge (See FEMALE WEDGE REMOVAL/INSTALLATION.)

c. Front header trim (See FRONT HEADER TRIM REMOVAL/INSTALLATION.)

d. Windshield garnish (See WINDSHIELD GARNISH REMOVAL/INSTALLATION.)

5. Insert a tape-wrapped flathead screwdriver into the position shown in the figure, rotate it in the direction of the arrow and detach A-pillar garnish clip.

6. While lifting up the A-pillar garnish in the direction of arrow (1) shown in the figure, move it in the direction of arrows (2) and (3), and detach the clip from the A-pillar garnish.

7. Move the A-pillar garnish in the direction of the arrow shown in the figure and remove it.

8. Remove the clips remaining on the body.

< Previous Next >

© 2014 Mazda North American Operations, U.S.A.