POWER WINDOW SUBSWITCH REMOVAL/INSTALLATION
2016 – MX-5 – Body and Accessories
POWER WINDOW SUBSWITCH REMOVAL/INSTALLATION
1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)
2. Remove the passenger-side door trim. (See DOOR TRIM REMOVAL/INSTALLATION.)
3. Move the edges of the switch panels in the directions of the arrows shown in the figure and detach the tabs from the switch panels in the order starting from the vehicle front side.
4. Remove the power window subswitch from the switch panel.
5. Install in the reverse order of removal.
6. If the power window subswitch is replaced, perform the power window system initial setting.(See POWER WINDOW SYSTEM INITIALIZATION PROCEDURE.)