Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

AUTO-DIMMING REARVIEW MIRROR INSPECTION

< Previous Next >

2016 – MX-5 – Body and Accessories

AUTO-DIMMING REARVIEW MIRROR INSPECTION

Operational Inspection

1. Switch the ignition ON (engine off or on).

2. Move the vehicle to a place with a showroom level of brightness.

3. Verify that the indicator light is illuminated.

4. Verify that the indicator light switches when the auto-dimming mirror on switch and auto-dimming mirror off switch is pressed.

5. While the indicator light is illuminated, verify that the mirror surface brightens.

6. Cover the front light sensor with a hand and verify that the mirror surface darkens when light is shone on the rear light sensor.

7. Remove your hand covering the front light sensor and verify that the mirror surface brightens.

Terminal Voltage Table (Reference)

1. Measure the voltage at each terminal.

  • If the voltage is not as specified in the Terminal Voltage Table (Reference), inspect the parts under “Inspection item (s)” and related wiring harnesses.

Terminal

Signal name

Connected to

Measured condition

Voltage (V)

Inspection item(s)

A

B

IG1

C/U IG1 15A fuse

Switch the ignition ON (engine on or off)

B+

  • C/U IG1 15A fuse

  • Related wiring harnesses

Switch the ignition off

1.0 or less

C

D

R position signal

Electrical supply unit (ESU)

R position

B+

  • Electrical supply unit (ESU)

  • Related wiring harnesses

Other than R position

1.0 or less

E

GND

Power outer mirror (LH)

Under any condition

1.0 or less

  • Related wiring harnesses

F

GND

Body ground

Under any condition

1.0 or less

  • Related wiring harnesses

G

Power output

Power outer mirror (LH)

Auto-dimming rearview mirror operation

0.4—1.2

  • Related wiring harnesses

Other

1.0 or less

H

I

J

Power supply

INTERIOR 15 A fuse

Under any condition

B+

  • INTERIOR 15 A fuse

  • Related wiring harnesses

< Previous Next >

© 2014 Mazda North American Operations, U.S.A.