2016 – MX-5 – Body and Accessories

TRUNK LID RELEASE ACTUATOR INSPECTION

1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2. Remove the trunk end trim. (See TRUNK END TRIM REMOVAL/INSTALLATION.)

3. Remove the trunk lid latch and release actuator. (See TRUNK LID LATCH AND RELEASE ACTUATOR REMOVAL/INSTALLATION.)

4. Press in the latch lever of the trunk lid latch and release actuator using a flathead screwdriver, and set it to the latched condition.

5. Connect terminal A to the positive battery voltage, connect terminal B to the ground, and verify that the latch lever is released and the condition changes to the unlatch condition.

• If the operation cannot be verified, replace the trunk lid latch and release actuator.

< Previous Next >