CONVERTIBLE TOP SWITCH INSPECTION
2016 – MX-5 – Body and Accessories
CONVERTIBLE TOP SWITCH INSPECTION
1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)
2. Remove the scuff plate. (See SCUFF PLATE REMOVAL/INSTALLATION.)
3. Remove the tire house trim. (See TIRE HOUSE TRIM REMOVAL/INSTALLATION.)
4. Verify that the continuity is as indicated in the table.
-
If not as indicated in the table, replace the convertible top. (See CONVERTIBLE TOP REMOVAL/INSTALLATION.)
NOTE:
-
When inspecting the convertible top switch on the unlatch side of the convertible top, move link B to the position 94—104° from the fully-closed position.