Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

DRIP MOLDING REMOVAL/INSTALLATION

< Previous Next >

2016 – MX-5 – Body and Accessories

DRIP MOLDING REMOVAL/INSTALLATION

1. Open the door.

2. Pull the header weatherstrip in the direction of arrow (1) shown in the figure and peel back the header weatherstrip to the positions of arrows (2).

3. Remove the screws.

4. Remove the drip molding.

5. Install in the reverse order of removal.

< Previous Next >

© 2014 Mazda North American Operations, U.S.A.