Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

BACK TRIM REMOVAL/INSTALLATION

< Previous Next >

2016 – MX-5 – Body and Accessories

BACK TRIM REMOVAL/INSTALLATION

1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2. Remove the following parts:

a. Selector lever knob (AT) (See AUTOMATIC TRANSMISSION SHIFT MECHANISM REMOVAL/INSTALLATION.)

b. Shift lever knob (MT)

c. Shift panel component (See SHIFT PANEL REMOVAL/INSTALLATION.)

d. Upper panel (See UPPER PANEL REMOVAL/INSTALLATION.)

e. Parking brake lever boot panel (See PARKING BRAKE LEVER BOOT PANEL REMOVAL/INSTALLATION.)

f. Rear console (See REAR CONSOLE REMOVAL/INSTALLATION.)

g. Scuff plate (See SCUFF PLATE REMOVAL/INSTALLATION.)

h. Tire house trim (See TIRE HOUSE TRIM REMOVAL/INSTALLATION.)

i. Front seat back bar garnish (See SEAT BACK BAR GARNISH REMOVAL/INSTALLATION.)

j. Quarter trim (See QUARTER TRIM REMOVAL/INSTALLATION.)

k. Wind blocker (See WIND BLOCKER REMOVAL/INSTALLATION.)

l. Roof hook lever (See ROOF HOOK REMOVAL/INSTALLATION.)

3. Remove the fasteners.

4. Move the back trim in the order of arrows (1), (2), (3) and (4) while detaching clips A and B using the fastener remover and remove the back trim.

5. Install in the reverse order of removal.

< Previous Next >

© 2014 Mazda North American Operations, U.S.A.