< Previous Next >

2016 – MX-5 – Body and Accessories

SEAT BACK CROSSMEMBER ASSEMBLY REMOVAL/INSTALLATION

1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2. Remove the following parts:

a. Selector lever knob (AT) (See AUTOMATIC TRANSMISSION SHIFT MECHANISM REMOVAL/INSTALLATION.)

b. Shift lever knob (MT)

c. Shift panel assembly (See SHIFT PANEL REMOVAL/INSTALLATION.)

d. Upper panel (See UPPER PANEL REMOVAL/INSTALLATION.)

e. Parking brake lever boot panel (See PARKING BRAKE LEVER BOOT PANEL REMOVAL/INSTALLATION.)

f. Rear console (See REAR CONSOLE REMOVAL/INSTALLATION.)

g. Scuff plate (See SCUFF PLATE REMOVAL/INSTALLATION.)

h. Tire house trim (See TIRE HOUSE TRIM REMOVAL/INSTALLATION.)

i. Wind blocker (See WIND BLOCKER REMOVAL/INSTALLATION.)

j. Seat back bar garnish (See SEAT BACK BAR GARNISH REMOVAL/INSTALLATION.)

k. Quarter trim (See QUARTER TRIM REMOVAL/INSTALLATION.)

l. Rear side trim (See REAR SIDE TRIM REMOVAL/INSTALLATION.)

m. Roof hook lever (See ROOF HOOK REMOVAL/INSTALLATION.)

n. Back trim (See BACK TRIM REMOVAL/INSTALLATION.)

3. Remove the seat belt retractor installation bolts and set aside the seat belt retractor. (See SEAT BELT REMOVAL/INSTALLATION.)

4. Remove the lock bracket. (See LOCK BRACKET REMOVAL/INSTALLATION.)

5. Remove the bolts.

6. Remove the bolts.

7. Remove the bolts.

8. Remove the seat back crossmember assembly.

9. Install in the reverse order of removal.

< Previous Next >