2016 – MX-5 – Body and Accessories

BACK-UP LIGHT REMOVAL/INSTALLATION

1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2. Remove the rear splash shield. (See REAR SPLASH SHIELD REMOVAL/INSTALLATION.)

3. Disconnect the connector.

Back-up light (LH)

Back-up light (RH)

4. Remove the screws.

5. While sliding clip A in the direction of arrow (1) shown in the figure, pull clip A in the direction of arrow (2) to detach it from the back-up light.

6. While pressing the clip B tabs in the direction of arrows (1) shown in the figure, press the clip B in the direction of arrow (2) to detach the clip B tabs from the back-up light.

7. Remove the back-up light.

8. Install in the reverse order of removal.

< Previous Next >