WASHER HOSE REMOVAL/INSTALLATION
2016 – MX-5 – Body and Accessories
WASHER HOSE REMOVAL/INSTALLATION
Washer Hose A
1. Turn the steering wheel to full right lock.
2. Lift up the vehicle.
3. Remove the front mudguard No.2. (See FRONT MUDGUARD REMOVAL/INSTALLATION.)
4. Disconnect washer hose A from the washer motor.
5. Pull washer hose A out from the washer tank hook.
6. Pull out washer hose A from clip A.
7. While pressing the clip B tabs in the direction of arrows (1) shown in the figure, press the clip B in the direction of arrow (2) to detach the clip B tabs from the body.
8. Disconnect washer hose B from joint pipe A.
9. Remove washer hose A.
10. Install in the reverse order of removal.
Washer Hose B
1. Remove the wiper arm and blade. (See WIPER ARM AND BLADE REMOVAL/INSTALLATION.)
2. Remove the cowl grille. (See COWL GRILLE REMOVAL/INSTALLATION.)
3. Disconnect washer hose C from joint pipe B.
4. Disconnect washer hose B from joint pipe C.
5. Pull out washer hose B from the hook.
6. Remove washer hose B.
7. Install in the reverse order of removal.