Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

CONDENSER REMOVAL/INSTALLATION

< Previous Next >

2016 – MX-5 – Body and Accessories

CONDENSER REMOVAL/INSTALLATION

1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2. Remove the wind blocker. (See WIND BLOCKER REMOVAL/INSTALLATION.)

3. Partially peel back the side shelf (LH) and rear package trim to a position where the condenser is visible. (See SIDE SHELF REMOVAL/INSTALLATION.) (See REAR PACKAGE TRIM REMOVAL/INSTALLATION.)

4. Disconnect the connector.

5. Remove the bolt.

6. Remove the condenser.

7. Install in the reverse order of removal.

< Previous Next >

© 2014 Mazda North American Operations, U.S.A.