Front Power Window Motor Inspection
| 1. |
Remove the front door trim panel.
(Refer to the BD group - "Front
door") |
| 2. |
Disconnect the connector from the
motor.
[Driver]
[Assistant]
|
| 3. |
Connect the motor terminals No.2 and No.3
directly to battery voltage (12V) and connect the motor terminal
No.4 to ground (0V).
Check that the motor operates
smoothly.
If the operation is abnormal, replace the
motor.
[Safety Power
Window]
|
| 4. |
Connect the motor terminals directly to
battery voltage (12V) and check that the motor operates smoothly.
Next, reverse the polarity and check that the motor operates
smoothly in the reverse direction. If the operation is abnormal,
replace the motor.
[General Window]
|
Rear Power Window Motor Inspection
| 1. |
Remove the rear door trim panel.
(Refer to the BD group - "Rear
door") |
| 2. |
Disconnect the 2P connector from the
motor.
|
| 3. |
Connect the motor terminals directly to
battery voltage (12V) and check that the motor operates smoothly.
Next, reverse the polarity and check that the motor operates
smoothly in the reverse direction. If the operation is abnormal,
replace the motor.
|
