VELOSTER(FS) >2013 > G 1.6 T-GDI > Body Electrical System > Lighting System > Rear combination lamp>Repair procedures
Removal
Rear Combination lamp
1.
Disconnect the negative (-) battery terminal.
2.
Disconnect the connector (B) after loosening 2 screws, and then remove the rear combination lamp (A).
3.
Remove the bulb after turning in the counterclockwise direction.
A : Side marker lamp
B : Tail lamp/ Stop lamp
C : Back up lamp
D : Turn signal lamp
Installation
1.
Install the rear combination lamp assembly.
2.
Connect the rear combination lamp assembly connector.
3.
Connect the negative (-) battery terminal.
