VELOSTER(FS) >2013 > G 1.6 T-GDI > Body Electrical System > Immobilizer System > Immobilizer Control Unit>Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to the BD group - "Crash pad")
3.
Disconnect the connector of the immobilizer unit and then remove the immobilizer unit (A) after loosening the bolt.
[USA]
[CANADA]
Installation
1.
Install the immobilizer unit.
2.
Connector the immobilizer unit.
3.
Install the crash pad lower panel.
