VELOSTER(FS) >2013 > G 1.6 T-GDI > Body Electrical System > Rear Parking Assist System > Parking Assist Sensor>Repair procedures
Removal
1.
Remove the rear bumper.
(Refer to the Body group - "Rear bumper")
2.
Disconnect the connector from the rear bumper.
3.
Disconnect the connector(B) from the rear ultra sensor(A).
4.
Pull out the sensor (A) by opening the sensor holder (C) out.
Installation
1.
Install the rear ultra sensor after connecting the connector.
2.
Install the rear bumper.
