| 1. |
Remove the rear wheel & tire.
Tightening
torque :
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~
79.6lb-ft)
|
|
Be careful not to damage to the hub
bolts when removing the rear wheel &
tire. |
|
| 2. |
Remove the rear shock absorber (A) from the
frame by loosening the bolt.
Tightening
torque :
98.1 ~ 117.7N.m (10.0 ~ 12.0kgf.m, 72.3
~ 86.8lb-ft)
|
|
| 3. |
Loosen the bolt & nut and then remove the
rear shock absorber (A) from the torsion beam axle (B).
Tightening
torque :
98.1 ~ 117.7N.m (10.0 ~ 12.0kgf.m, 72.3
~ 86.8lb-ft)
|
|
| 4. |
Installation is the reverse of
removal. |
| 1. |
Check the components for damage or
deformation. |
| 2. |
Compress and extend the piston and check that
there is no abnormal resistance or unusual sound during
operation. | |
