| 1. |
Remove the rear wheel & tire.
Tightening
torque :
88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~
79.6lb-ft)
|
|
Be careful not to damage to the hub
bolts when removing the rear wheel &
tire. | |
| 2. |
Remove the parking brake bracket
(A).
Tightening
torque :
9.8 ~ 13.7N.m (1.0 ~ 1.4kgf.m, 7.2 ~
10.1lb-ft)
|
|
| 3. |
Loosen the bolt and then remove the wheel
speed sensor cable (A) from the torsion beam axle.
Tightening
torque :
6.9 ~ 10.8N.m(0.7 ~ 1.1kgf.m, 5.1 ~
8.0lb-ft)
|
|
| 4. |
Remove the brake caliper assembly (A) from the
torsion beam axle by loosening the bolts.
Tightening
torque :
63.7 ~ 73.5N.m(6.5 ~ 7.5kgf.m, 47.0 ~
54.2lb-ft)
|
|
| 5. |
Loosen the bolt & nut and then remove the
rear shock absorber (A) from the torsion beam axle (B).
Tightening
torque :
98.1 ~ 117.7N.m (10.0 ~ 12.0kgf.m, 72.3
~ 86.8lb-ft)
|
|
| 6. |
Remove the torsion beam axle (A) from the body
loosening the bolts.
Tightening
torque :
137.3 ~ 156.9N.m (14.0 ~ 16.0kgf.m,
101.3 ~ 115.7lb-ft)
|
|
| 7. |
Remove the rear hub assembly.
(Refer to DS group - "Rear
Axle") |
| 8. |
Installation is the reverse of
removal. | |
