| Manual Transaxle Oil
Inspection |
| 1. |
Park the vehicle on a level ground and stop
the engine. |
| 2. |
Retighten the oil filler plug (A) with a new
washer.
|
| 3. |
Check level with finger.
|
Oil level must be up to fill the hole,
if not, add oil until it runs
over. |
|
| 4. |
Install the filler plug with a new
gasket.
Tightening
torque:
58.9 ~ 78.5 N.m (6.0 ~ 8.0 kgf.m, 43.4 ~
57.8 lb-ft)
| |
| Manual Transaxle Oil
Replacement |
| 1. |
Park the vehicle on a level ground and stop
the engine. |
| 2. |
Drain the manual transaxle oil after loosening
the drain plug (A).
|
| 3. |
Intall the drain plug with a new
gasket
Tightening
torque:
58.9 ~ 78.5 N.m (6.0 ~ 8.0 kgf.m, 43.4 ~
57.9 lb-ft)
| |
| 4. |
Add new oil through the filler plug hole and,
fill it just below the plug opening.
Standard
oil: SAE 75W/85, API GL-4
Oil
capacity: 1.8 ~ 1.9L (0.48 ~ 0.50
U.S.gal., 1.90 ~ 2.01 U.S. qt., 1.58 ~ 1.67 lmp
qt.)
| | |
