| 1. |
Disconnect the back up lamp switch connector
(A).
|
| 2. |
Check the continuity between no. 1 and 2
terminals of backup lamp switch. When the shift lever is in reverse,
there should be continuity. |
| 3. |
If necessary, repair or replace the backup
lamp switch.
|
| 1. |
Disconnect the back up lamp switch connector
(A).
|
| 2. |
Remove the back up lamp switch
(A).
|
| 3. |
Replace a new one and install the back up lamp
switch.
Tightening
torque:
29.4 ~ 34.3 N.m (3.0 ~ 3.5 kgf.m, 21.7 ~
25.3 lb-ft)
| | |
