VELOSTER(FS) >2013 > G 1.6 T-GDI > Heating,Ventilation, Air Conditioning > Air Conditioning System > Evaporator Temperature Sensor>Repair procedures  
Inspection
1.
Ignition "OFF".
2.
Remove the evaporator temperature sensor after disconnecting the connector.
3.
Using the multi-tester, measure resistance between terminal "+" and "-" of evaporator temperature sensor.

Specification
Evaporator core
temperature[°C(°F)]
 Resistance[kΩ]
 Voltage[V]
-20 (-4)
 13.59
 2.88
-10 (14)
 6.273
 1.927
0 (32)
 3.129
 1.192
10 (50)
 1.668
 0.715
20 (68)
 0.942
 0.431
30 (86)
 0.56
 0.265
40 (104)
 0.347
 0.168
50 (122)
 0.224
 0.11

Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Disconnect the evaporator temperature sensor connector.
3.
Remove the evaporator temperature sensor (A), by pulling it after rotating 90° in a counterclockwise direction.

4.
Installation is the reverse order of removal.