| Component Replacement After
Deployment |
|
Before doing any SRS repairs, use the GDS to
check for DTCs. Refer to the Diagnostic Trouble Code list for
repairing of the related DTCs. |
When the front airbag(s)
deployed after a collision, replace the following items.
| - |
Seat belt
pretensioner(s) |
| - |
Inspect the clock spring for heat
damage.
If any damage found, replace the clock
spring.
|
When the side/curtain
airbag(s) deployed after a collision, replace the following
items.
| - |
Side impact sensor(s) for the deployed
side(s) |
| - |
Deployed seat belt
pretensioner(s) |
After the vehicle is
completely repaired, confirm the SRS airbag system is OK.
| - |
Turn the ignition switch ON; the SRS indicator
should come on for about six seconds and then go
off. |
