| 1. |
Using a screwdriver or remover, remove the
wiper arm cover (A).
|
| 2. |
Remove the wiper arm mounting hole plug
(B). |
| 3. |
After loosening the mounting nuts, then remove
the wiper arm (A).
Tightening
torque :
22.6 ~ 26.5 N.m (2.3 ~ 2.7 kgf.m, 16.6 ~
19.5 lb-ft)
|
|
| 4. |
Remove the washer nozzle hose
(B). |
| 5. |
Detach the clips, then remove the cowl top
cover (A).
|
| 6. |
Installation is the reverse of
removal.
| •
|
Replace any damage
clips. | | | |
