Rear Seat Belt Replacement
| •
|
When installing the belt, make sure not
to damage the retractor.
| |
| 1. |
Remove the following items first
:
| A. |
Rear seat assembly
(Refer to the BD group - "Rear
Seat") |
| B. |
Front door scuff trim [LH]
(Refer to the BD group - "Interior
Trim") |
| C. |
Rear door scuff trim [RH]
(Refer to the BD group - "Interior
Trim") | |
| 2. |
Using a screwdriver or remover, remove the
rear transverse trim (A).
|
| 3. |
After loosening the mounting bolt, then remove
the rear seat belt lower anchor (A).
[LH,
RH]
Tightening
torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~
39.8 lb-ft)
|
|
| 4. |
Using a screwdriver or remover, remove the
center pillar lower trim (A).
[LH]
|
| 5. |
Using a screwdriver or remover, remove the
luggage side trim lamp (A). |
| 6. |
Disconnect the luggage side trim lamp
connector (B). |
| 7. |
After loosening the mounting screws, then
remove the luggage side trim (C).
[LH]
[RH]
|
| 8. |
After loosening the mounting bolt, then remove
the rear seat belt (A) and rear seat belt retractor
(B).
Tightening
torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~
39.8 lb-ft)
|
|
| 9. |
Installation is the reverse of
removal.
| •
|
Make sure the connector is plugged
in properly. |
| •
|
Replace any damage clips.
| | |
Rear Seat Belt Buckle Replacement
| 1. |
Remove the following items first
:
| A. |
Rear seat cushion assembly
(Refer to the BD group - "Rear
Seat") | |
| 2. |
After loosening the mounting bolt, then remove
the rear seat belt buckle (A).
[LH]
Tightening
torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~
39.8 lb-ft)
|
[RH]
Tightening
torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~
39.8 lb-ft)
|
|
| 3. |
Installation is the reverse of
removal. |
