| 1. |
Disconnect the vapor hose
(A). |
| 2. |
Remove the PCV valve (B).
|
| 1. |
Insert a thin stick (A) into the PCV valve (B)
from the threaded side to check that the plunger
movement.
|
If the plunger does not move (PCV valve
is clogged), clean or replace the valve.
| |
| 1. |
Installation is reverse of
removal.
PCV Valve
installation:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~
8.7 lb-ft)
| | |
