| 1. |
Rollroad bracket mounting bolts and rollroad
bracket(A).
Tightening
torque
Nut (B) :
107.9 ~ 127.5 N.m (11.0 ~ 13.0 kgf.m,
79.6 ~ 94.0 lb-ft)
Bolt (C) :
49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~
47.0 lb-ft)
| |
| 2. |
Remove the rollroad supprt
bracket(D).
Tightening
torque:
49.0 ~ 68.6 N.m (5.0 ~ 7.0 kgf.m, 36.2 ~
50.6 lb-ft)
|
|
| 3. |
Install in the reverse order of removal.
|
Engine Mounting Support Bracket
| 1. |
Disconnect the ground cable.
Tightening
torque
Ground line bolt :
10.8 ~ 13.7 N.m (1.1 ~ 1.4 kgf.m, 8.0 ~
10.1 lb-ft)
| |
| 2. |
Install the jack to the edge of upper oil pan
to support the engine.
|
Insert the rubber block between jack and
oil pan. | |
| 3. |
Remove the engine mounting support bracket
(A).
Tightening
torque
Nut (B) :
63.7 ~ 83.4 N.m (6.5 ~ 8.5 kgf.m, 47.0 ~
61.5 lb-ft)
Bolt and nuts (C) :
49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~
47.0 lb-ft)
|
|
| 4. |
Install in the reverse order of removal.
|
