Removal and Installation

1.	Disconnect the battery negative terminal.

2.	Remove the air cleaner assembly. (Refer to Intake and exhaust system - "Air Cleaner")

3.	Disconnect the over flow hose (A) from the radiator.

4.	Disconnect the ATF cooler hose from cooling fan.

5.	Remove the front bumper. (Refer to Body - "Front Bumper")

6.	Remove the head lamp. (Refer to Body Electrical System - "Head Lamp")

7.	Remove the radiator upper bracket (A).

8.	Disconnect the cooling fan controller connector (A).

9.	Remove the filler neck assembly bolts(A).

10.	Remove the cooling fan assembly (B) from radiator (A). Tightening torque : 4.9 ~ 7.8 N.m (0.5 ~ 0.8 kgf.m, 3.6 ~ 5.7 lb-ft)

11.	Install in the reverse order of removal.