VELOSTER(FS) >2013 > G 1.6 T-GDI > Engine Mechanical System > Cooling System > Water Pipe>Repair procedures
Removal and Installation
1.
Remove the water temperature control assembly.
(Refer to Colling System - "Water Temperature Control Assembly")
2.
Remove the water pipe(A).
Tightening torque
M6 bolt and nuts :
9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)
M8 bolt :
18.6 ~ 23.5N.m (1.9 ~ 2.4kgf.m, 13.7 ~ 17.4lb-ft)
3.
Install in the reverse order of removal.
