| 1. |
Remove the under
covers. |
| 3. |
Using the SST(09215-3C000) and remove the oil
pan.
| •
|
Insert the SST between the oil pan
and the ladder frame by tapping it with a plastic hammer
in the direction of 
arrow. |
| •
|
After tapping the SST with a
plastic hammer along the direction of  arrow around more than 2/3 edge
of the oil pan, remove it from the ladder
frame. |
| •
|
Do not turn over the SST abruptly
without tapping. It be result in damage of the
SST. | | |
| 1. |
Install the oil pan.
| (1) |
Using a razor blade and gasket scraper,
remove all the old packing material from the gasket
surfaces.
|
Check that the mating surfaces are
clean and dry before applying liquid
gasket. | |
| (2) |
Apply liquid gasket as an even bead,
centered between the edges of the mating surface.
Liquid
gasket : TB 1217H or LOCTITE
5900H
|
| • |
To prevent leakage of oil,
apply liquid gasket to the inner threads of the
bolt holes. |
| • |
Do not install the parts if
five minutes or more have elapsed since applying
the liquid gasket.
Instead, reapply liquid
gasket after removing the
residue. |
| • |
After assembly, wait at
least 30 minutes before filling the engine with
oil. | | |
| (3) |
Install the oil pan (A) with the
bolts.
Uniformly tighten the bolts in several
passes.
Tightening torque :
9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2
~ 8.7lb-ft)
|
| |
|
