id098008950000

Symbol Mark

am6zzb00000329

Removal Procedure

1.Drill the spot welds in the 25 locations in area A shown in the figure.

am3zzb00000481

2.Remove the cowl side reinforcement (front).

3.Drill the spot welds in the 17 locations in area B shown in the figure.

4.Drill the spot welds in the 7 locations in area C shown in the figure.

Note

• When drilling the spot welds in the 7 locations in area C shown in the figure, do not drill through-holes in consideration of the workability when installing.

am3zzb00000482

5.Remove the apron reinforcement (lower) (rear).